The Cleaning of Natural Stone Buildings #Buildingconservation

An article courtesy of  the Stone Federation

The Stone Heritage Group is an arm of Stone Federation dedicated to resourcing the heritage sector of the natural stone industry and promoting the use of Federation members for projects of this nature.  Almost 50% of the overall membership work within the conservation and restoration sector, and it plays a large part in the overall natural stone arena. Aura Conservation is a Member of the Stone Federation

Where to begin when considering the cleaning of natural stone buildings.

The cleaning of a building is no simple matter and there are special considerations which call for a high degree of expertise in all elements and stages of stone cleaning.  Specialised knowledge is necessary for the correct specification to be given for each building.

In the past, it was smoke emissions from the burning of coal that caused the soiling of buildings but today it is vehicle exhaust emissions and acid rain that are mainly responsible.  Many studies have shown that there are advantages to cleaning buildings on a regular basis.

Steam Engine

Engine and carriages from the London and North Western Railway, illustrating the vast amounts of smoke emitted from these marvellous engineering triumphs.

The correct cleaning of natural stone is a priority for the sector as much of the architectural heritage of the country is made from this material.  Stone is one of the most durable of all building materials and compares very favourably with others from an economic as well as an aesthetic point of view, especially when maintenance and whole life costs are taken into account.

Nevertheless, proper maintenance is essential and if this is carried out periodically with suitable skill and understanding, the greater will be the environmental and practical advantages in the preservation of the structure.  What must be stressed however, is that in the wrong hands and by the use of the wrong process for the material in question, much harm can be caused with unsightly effects, some of which may not become apparent for some months after the cleaning has been completed and will be difficult, if not impossible, to remedy.  This is why it is imperative to involve a member of Stone Federation at an early stage when the cleaning is being considered.

It is essential that cleaning should be carried out by fully trained operatives in order to avoid any damage being caused by an inappropriate cleaning method or an incompetent operative. It should be remembered that decay can often take place around an open joint or cracked stone which cannot be seen if they are obscured by dirt or heavy soiling.

Reference should also be made to BS 8221 (part 1): 2000 Code of Practice for Cleaning and Surface Repairs.  Stone Federation also produces other relevant publications, and these can be found on their website at www.stonefed.org.uk.

The Stone Federation Great Britain Guide to Best Practice is based on the relevant parts of a number of British Standards relating to masonry cleaning and incorporates current good practice.  It sets out the principal factors involved when deciding to clean and maintain buildings incorporating different types of masonry.

This document’s aim is to give subjective advice as a guide; however, it is by no means a definitive guide. Variables exist with every project and no two projects are the same.

To order your copy of this publication you can email matt@stonefed.org.uk.  Please note that our publications are not available to companies that could be members but are not.


The services we provide for you at aura conservation


Stone, Brick, Cast Stone, Terracotta, Sculpture, Statuary, Bronze Statuary.


Roof Tiling, Steeplejacks and Lightning Protection, Roof Drainage, Lead Protection, Roof Features.


Painting & Decorating, Plasterwork, Tiling, Timber Flooring.

Services & Treatment

Protection and Remedial Treatment, Paint Finishes, Mortars & Renders, Pointing, Paint Removal, Masonry Cleaning, Structural Repairs, Epoxy Resin Repairs.

Metal, Wood & Glass

Fine Joinery, Wood Carving, Windows and Doors, Secondary Glazing, Metalwork.

You can contact us at:

Dunham House, 181 Wellington Road North, Stockport, Cheshire, SK4 2PB.

Tel: 0161 442 9850 / Fax: 0161 432 8478

Email  enquiries@auraltd.co.uk 
Web    www.auraltd.co.uk



Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: